Skip to main content

Why is my MMP not showing iOS attribution data?

PUBLICO offers MMP setup and audit services.

PUBLICO
PUBLICO
November 13, 2026Measurement & AnalyticsApp Development

The short answer

Your MMP is not showing complete iOS attribution data because Apple’s privacy frameworks send only delayed, aggregated signals. Most gaps come from incomplete SKAN or AdAttributionKit configuration, from how ATT consent is passed, or from campaigns that do not clear privacy thresholds. The data is also delayed by design.

Your MMP is not showing complete iOS attribution data because Apple’s privacy tools deliver delayed, aggregated numbers instead of clear user-level detail. Most missing data comes from incomplete setup of those tools, from ATT consent that never reaches the MMP, or from volume that is too low to clear privacy limits.

What is an MMP?

An MMP (Mobile Measurement Partner) is a third-party platform that attributes app installs and in-app events to the marketing channels that drove them.

You integrate its SDK into the app. The SDK records installs and later actions (registration, trial start, purchase) and sends them to the MMP. The MMP then decides which channel gets credit and returns postbacks to the ad platforms so their algorithms can optimise.

Without an MMP, each platform reports only its own view and often claims the same install. The MMP is the single source that applies one set of rules across all channels.

Which MMPs are commonly used?

The main platforms used by teams running meaningful paid app budgets are AppsFlyer, Adjust, Singular, Branch, Kochava and Tenjin.

All of them can receive and decode SKAN and AdAttributionKit postbacks when configured correctly. Differences usually come down to pricing, partner integrations, reporting depth and how easily they connect to your other tools.

What is ATT?

ATT (App Tracking Transparency) is the system Apple requires every app to use. It shows a prompt asking the user whether the app may track them across other companies’ apps and websites.

If the user allows it, the app can access the advertising identifier (IDFA) and deterministic matching becomes possible. If the user declines, the identifier is zeroed and user-level cross-app tracking is blocked.

Most users decline. Industry figures for people who see the prompt typically sit well below 50 percent and vary by category and prompt timing. Adjust reported an average of 35 percent in Q2 2025 among users shown the prompt.

What is SKAN?

SKAN (SKAdNetwork) is Apple’s framework for measuring ads without user-level identifiers.

When a user does not grant ATT consent, SKAN is the primary way ad networks and your MMP still learn that an install occurred. The device itself decides which ad gets credit and later sends a signed, aggregated postback to the network. The postback contains no user or device ID. An optional copy can be sent to the MMP if you configure the endpoint.

SKAN can send up to three postbacks per install, covering activity in days 0-2, 3-7 and 8-35 after first launch. Only the first postback can carry a fine conversion value when volume is high enough. All postbacks are delayed by design.

What is AdAttributionKit?

AdAttributionKit is Apple’s successor to SKAN. It uses the same privacy model (delayed, aggregated postbacks with no user identifiers) and adds support for measuring re-engagement of existing users.

Most modern MMPs ingest both. In practice the two look similar in reports: late, campaign-level signals rather than individual users.

How do these cause missing iOS data?

Incomplete MMP configuration

If SKAN or AdAttributionKit is not enabled, the conversion value schema is missing or outdated, the SDK is old, or postback copy endpoints are not registered, the MMP receives nothing or only raw incomplete numbers.

ATT signal not reaching the MMP

Showing the prompt is not enough. If the consent status is not passed correctly to the MMP, even opted-in users can disappear from deterministic reports and the separation between consented and SKAN data breaks.

SKAN / AdAttributionKit gaps

Data appears only when the app and networks are registered, the conversion value map is active and events fire inside the measurement windows, and campaign volume is high enough to clear Apple’s privacy thresholds (Apple does not publish the exact numbers). Low volume produces null or coarse values only.

Low opt-in rates

Because most users decline ATT, the majority of iOS installs can only be measured through the delayed aggregated frameworks. That is why dashboards look sparse even when campaigns are spending.

What else commonly causes gaps?

Media source misalignment

Meta, TikTok, Google Ads and others must also have SKAN activated and must use a matching conversion value schema. If they do not, the platforms may show delivery while the MMP shows little or nothing.

Apple Ads uses a separate path

Apple Search Ads does not rely on SKAN for its own attribution. It uses a short-lived AdServices token that must be requested and sent within 24 hours. Age or gender targeting on ad groups can also return no attribution.

Delays are intentional

Even with perfect setup, first postbacks usually appear one to three days after installs. Later windows continue for weeks. Comparing day-of numbers across platforms will always show gaps.

What should you check before raising spend?

Before increasing iOS budget, ask for confirmation of these points:

  • Postback copy endpoints are active and networks are forwarding.
  • The conversion value schema is mapped and events are firing in the correct windows.
  • ATT consent status is reaching the MMP.
  • Ad platforms have SKAN enabled and aligned with your schema.
  • Some fine conversion values are appearing (volume is sufficient).
  • For Apple Ads, the AdServices token flow is working.

If these cannot be shown, treat missing data as a setup issue, not a performance issue, and pause scaling until they are fixed.

Frequently asked questions.

Usually the network is receiving postbacks but the copy to the MMP is not configured, or privacy thresholds are nullifying conversion values. Check postback copy status and volume first.

First postbacks normally arrive one to three days after installs. Later postbacks can continue for several weeks. Early empty days are expected.

Only for users who grant ATT consent. Everyone else is measured only through aggregated SKAN or AdAttributionKit postbacks.

Rarely. The configuration requirements are the same across the major MMPs. Fix the setup before considering a change.

Not in practice yet. The two interoperate and most MMPs handle both. The measurement model remains delayed and aggregated.

What to do next

Want a clear read on what is actually missing in your iOS data?

Talk to our team. We will look at the numbers and tell you where we would start.

Talk to our team

Share this Article:

Link copied!

Related Articles

How to Choose the Right Mobile Measurement Partner (MMP) for Your App

September 9, 2026

AppsFlyer, Adjust, Singular, Branch, Kochava and Tenjin compared: how MMPs work, what the free tiers cover and what they cost at scale.

Read More

Not Seeing iOS Data for Your App? These Are the Real Reasons

April 29, 2026

If your iOS analytics look incomplete, delayed, inconsistent, or simply missing — you're not imagining it. Since Apple's privacy changes, the data picture has fundamentally changed.

Read More
WhatsApp